Eave

PVC Protection Mesh 100 mm
The PVC protective mesh is applied to eaves and draining valleys in all the areas where there are air inlets between the tiles, which may allow birds, leaves, etc., to enter. Designed and produced with flexible ends for working under tension to create a barrier for animals and objects.

Material

PVC

Colour

4031033 - red

Application

Laying procedure: laid through glue/mastique and/or screws, at the base, which should have the respective fixing support dimensions and characteristics. It should be laid before the ceramic tiles, in a plane further back so that it is suitably hidden. For a superior aesthetic result, UM Canudo tile closures (tamancos) can be used in an inverted manner to cover the spaces between the tiles with the desired finish.

PVC Protection Mesh Characteristics

Width: 100 mm
Length: 1 m
Unit Weight: 0,100 kg
Yield: 1 m
 
PVC Protection Mesh 60 mm
The PVC protective mesh is applied to eaves and draining valleys in all the areas where there are air inlets between the tiles, which may allow birds, leaves, etc., to enter. Designed and produced with flexible ends for working under tension to create a barrier for animals and objects.

Material

PVC

Colour

4064878 - red

Application

Laying procedure: laid through glue/mastique and/or screws, at the base, which should have the respective fixing support dimensions and characteristics. It should be laid before the ceramic tiles, in a plane further back so that it is suitably hidden. For a superior aesthetic result, UM Canudo tile closures (tamancos) can be used in an inverted manner to cover the spaces between the tiles with the desired finish.

PVC Protection Mesh Characteristics

Width: 60 mm
Length: 1 m
Unit Weight: 0,075 kg
Yield: 1 m
 
ALUMINIUM EAVE CLOSURE STRIP
Produced in lacquered aluminium 0.3 mm thick and 400 mm wide, this enables efficient use of the transition areas from the slopes to the eaves. Ideal for the transition of sub-tiles and flexible membranes to the edge parts. Very effective to ensure the watertightness in the slope breaking zone between the slope and the edge.
Extremely resistant to all atmospheric elements and also in moulding / application. Its pre-made crease design promotes easy application with optimum contours to work with the edges of the edging system. The butyl glue at the upper end allows the strip to continue to work over time, without coming off.

Material

Aluminium

Colour

4030454 - red

Application

The strip should be laid from the underside of the corrugated sub-tile sheet/membrane, overlapping at least 10 cm and placed above the eave parts – over tiles such a spouts. It should be moulded with the hands on the eaves, to follow the geometry and define the channels of flow. The strip is then removed over the adhesive and adjusted for effective adhesion of the parts.
Note: If larger measurements are required, consult the Technical Department of UMBELINO MONTEIRO. If it is necessary to add more glue, use mastique glues.

Characteristics

Width: 400 mm
Length: 5 m
Unit Weight: 1,27 kg
Yield: 5 m
Units per Box: 4 units

Our Brands

Here you can get to know our brands for your project. Let yourself be inspired!

Where to buy

Find your nearest point of sale.